ANALISIS PERBANDINGAN MUTU BETON DENGAN MENGGUNAKAN BERBAGAI CARA PENGADUKAN (READY MIX, MOLEN DAN MANUAL)
Abstrak
Concrete work is widely used in construction projects now. To get a good quality concrete depends very much on the quality of the constituent materials, namely cement, water, fine aggregate, coarse aggregate, and also the process of working or stirring. In this research, 27 MPa concrete compressive strength will be investigated with various stirring methods (Manual Mix, Molen Mix and Ready Mix). These three methods of stirring certainly have their respective uses in the process, usually Manual, Molen and Ready Mix are used depending on the conditions of the project being worked on. From this test, results are obtained by means of manual stirring, Molen stirring and Ready Mix with compressive strength average: (266,467 kg / cm2) (278,368 kg / cm2) (284,595 kg / cm2). The results of the study stated that the research carried out fulfilled the estimation target 'c = 27 Mpa.
An author who publishes in the Jurnal Darma Agung agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
